OpenWrt/Music

Aus Wiki
Zur Navigation springen Zur Suche springen

OpenWrt music streaming

Streaming music via OpenWrt on 4MB flash router

Install packages

opkg update
opkg install kmod-usb-audio kmod-usb-ohci kmod-usb-core kmod-sound-core
opkg install madplay mpc
opkg install snmpd
opkg install coreutils-stty

create files

mkdir /etc/scripts ; cd /etc/scripts
touch madplay.sh ; chmod +x $_
touch mpc_alarm.sh ; chmod +x $_
touch mpc_stop.sh ; chmod +x $_
touch serial.sh ; chmod +x $_
touch madplay_ip.conf ; touch mpc_ip.conf
cd /etc/init.d
touch madplay ; chmod +x $_
touch serial ; chmod +x $_

file contents

/etc/scripts/madplay.sh:
#! /bin/sh

while true
 do
 	sleep 2
 	wget -O - `cat /etc/scripts/madplay_ip.conf` | madplay -
 	sleep 8
 done
/etc/scripts/mpc_alarm.sh:
#!/bin/sh
IP=`cat /etc/scripts/mpc_ip.conf`

mpc -h $IP clear
mpc -h $IP repeat on
mpc -h $IP random off
mpc -h $IP single off
mpc -h $IP consume off
mpc -h $IP enable 2

mpc -h $IP load "Alarm Clock Intro"
mpc -h $IP shuffle
mpc -h $IP play

sleep 60

mpc -h $IP stop
mpc -h $IP clear
mpc -h $IP load "Alarm Clock"
mpc -h $IP random on
mpc -h $IP play

/etc/scripts/mpc_stop.sh:
#!/bin/sh
IP=`cat /etc/scripts/mpc_ip.conf`

mpc -h $IP stop


/etc/scripts/serial.sh:
#! /bin/sh
#
port="/dev/ttyATH0"
stty -F $port 9600 -echo

echo "!C,booted*" > $port

while true
do
   serialinput=""
	
   until serialinput=$(echo $serialinput | egrep "!A,|!C,")        # egrep "|" = OR
   do
      serialinput=$(head -n 1 < $port)
   done
   
   echo "$serialinput"

   case "$serialinput" in
     "!C,AlarmStart*"  ) /etc/scripts/mpc_alarm.sh &;;
     "!C,AlarmStop*"   ) /etc/scripts/mpc_stop.sh &;;
   esac 

done 

/etc/init.d/madplay:
#!/bin/sh /etc/rc.common
# madplay script

START=99

DAEMON=/etc/scripts/madplay.sh
DAEMONNAME=madplay
PIDFILE=/var/run/madplay.pid

start() {
	echo -n "starting: $DAEMONNAME" 

	if [ -f $PIDFILE ] ; then
	   echo
	   echo "$DAEMONNAME already running (PID=`cat $PIDFILE`)"
	   exit
	fi	

	touch $PIDFILE
	start-stop-daemon -S -p $PIDFILE -m -b -x $DAEMON
	echo "(PID=`cat $PIDFILE`)"
}

stop() {
	if [ ! -f $PIDFILE ] ; then
	   echo "$DAEMONNAME is not running"
	   exit
	fi

	PID=`cat $PIDFILE`
	echo "stopping: $DAEMONNAME(PID=$PID)"
		
	kill -INT $PID
	pkill -INT -P $PID

	rm -f $PIDFILE
}


/etc/init.d/serial:
#!/bin/sh /etc/rc.common
# serial interface script

START=99

DAEMON=/etc/scripts/serial.sh
DAEMONNAME=serial
PIDFILE=/var/run/serial.pid

start() {
	echo -n "starting: $DAEMONNAME" 

	if [ -f $PIDFILE ] ; then
	   echo
	   echo "$DAEMONNAME already running (PID=`cat $PIDFILE`)"
	   exit
	fi	

	touch $PIDFILE
	start-stop-daemon -S -p $PIDFILE -m -b -x $DAEMON
	echo "(PID=`cat $PIDFILE`)"
}

stop() {
	if [ ! -f $PIDFILE ] ; then
	   echo "$DAEMONNAME is not running"
	   exit
	fi

	PID=`cat $PIDFILE`
	echo "stopping: $DAEMONNAME(PID=$PID)"
		
	kill -INT $PID
	pkill -INT -P $PID

	rm -f $PIDFILE
}