Kingroon KP3S: Difference between revisions
mNo edit summary |
|||
| Line 3: | Line 3: | ||
* LJ12A3-4-Z/BX (4mm, NPN, Normally Open) | * LJ12A3-4-Z/BX (4mm, NPN, Normally Open) | ||
== Change TMC drivers to UART Mode == | == Change TMC drivers to UART Mode == | ||
* https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/issues/78 | |||
* https://www.3d-druck-community.de/showthread.php?tid=28594 | * https://www.3d-druck-community.de/showthread.php?tid=28594 | ||
* https://marlinfw.org/docs/hardware/tmc_drivers.html | * https://marlinfw.org/docs/hardware/tmc_drivers.html | ||
Revision as of 13:54, 2 November 2021
Hardware Mods
ABL Sensor
- LJ12A3-4-Z/BX (4mm, NPN, Normally Open)
Change TMC drivers to UART Mode
- https://github.com/makerbase-mks/MKS-Robin-Nano-V1.X/issues/78
- https://www.3d-druck-community.de/showthread.php?tid=28594
- https://marlinfw.org/docs/hardware/tmc_drivers.html
Mini Afterburner
Dual Gear Extruder
Software Mods
Installing Klipper
- ~ git clone https://github.com/th33xitus/kiauh.git
- cd kiauh
- ./kiauh.sh
Enable extra low-level STMicroelectronics STM32 STM32F103 28KiB bootloader 8 MHZ crystal USART PB11/PB10 250000 Baud !PC6,!PD13 GPIO pins at startup
- cd ~/klipper/
- ./scripts/update_mks_robin.py ./out/klipper.bin ./out/Robin_nano.bin
Klipper printer.cfg
- https://3dprintbeginner.com/how-to-install-klipper-on-kingroon-kp3s/
- https://gist.github.com/nezuppo/0d06444bbf61e6d6a8953caf31e5f25d
- Extruder=7.41