3D Printing

From Wiki
Revision as of 12:27, 24 September 2022 by Marcluer (talk | contribs)

Klipper with Fluidd


Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh
  • Webinterface > Serial Connection > General > /tmp/printer
  • Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
  • Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit:
~/printer.cfg

Klipper on Kingroon KP3S

Slicer Settings

PLA PETG ABS
KP3S Ender CR10 KP3S Ender CR10 KP3S Ender CR10
Skin Overlap Percentage 5% 15%
Infill Overlap Percentage 10% 20%
Printing Temperature 215 230
Build Plate Temperature 60 70
Retraction Distance 5,5 2
Retraction Speed 25 25
Retraction Minimum Travel 1,5 1,0