3D Printing

From Wiki

Klipper with Fluidd


Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh
  • Webinterface > Serial Connection > General > /tmp/printer
  • Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
  • Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit:
~/printer.cfg

Klipper on Kingroon KP3S

Slicer Settings

PLA PETG ABS
KP3S Ender CR10 KP3S Ender CR10 KP3S Ender CR10
Skin Overlap Percentage 5% 15%
Infill Overlap Percentage 10% 20%
Printing Temperature 215°C 230°C
Build Plate Temperature 60°C 70°C
Retraction Distance 5,5 2
Retraction Speed 25 25
Retraction Minimum Travel 1,5 1,0