3D Printing: Difference between revisions

From Wiki
Line 110: Line 110:
|-
|-
| Retraction Distance
| Retraction Distance
| 0.8mm
| 0.0
|
|
|  || 0.8mm
|  || 0.8mm
Line 119: Line 119:
|-
|-
| Retraction Speed
| Retraction Speed
| 20mm/s
|  
|
|
|  || 20mm/s
|  || 20mm/s

Revision as of 17:59, 24 September 2022

Klipper with Fluidd


Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh
  • Webinterface > Serial Connection > General > /tmp/printer
  • Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
  • Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit:
~/printer.cfg

Klipper on Kingroon KP3S

Slicer Settings

PLA PETG ABS
KP3S Ender CR10 KP3S Ender CR10 KP3S Ender CR10
Skin Overlap Percentage 5% 15% 5% - -
Infill Overlap Percentage 10% 20% 10% - -
Printing Temperature 215°C 230°C 255°C - -
Build Plate Temperature 60°C 70°C 100°C - -
Print Speed 100mm/s 100mm/s - -
Travel Speed 180mm/s 180mm/s - -
Initial Layer Speed 30mm/s 30mm/s - -
Fan Speed 60% 40% - -
Retraction Distance 0.0 0.8mm - -
Retraction Speed 20mm/s - -
Retraction Extra Prime 0.35mm³ - -