3D Printing: Difference between revisions

From Wiki
Line 130: Line 130:
|  
|  
|
|
|  || 0.25mm³
|  || 0.35mm³
|
|
|  ||  
|  ||  

Revision as of 12:48, 24 September 2022

Klipper with Fluidd


Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh
  • Webinterface > Serial Connection > General > /tmp/printer
  • Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
  • Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit:
~/printer.cfg

Klipper on Kingroon KP3S

Slicer Settings

PLA PETG ABS
KP3S Ender CR10 KP3S Ender CR10 KP3S Ender CR10
Skin Overlap Percentage 5% 15% 5% - -
Infill Overlap Percentage 10% 20% 10% - -
Printing Temperature 215°C 230°C 255°C - -
Build Plate Temperature 60°C 70°C 100°C - -
Print Speed 100mm/s 100mm/s - -
Travel Speed 180mm/s 180mm/s - -
Initial Layer Speed 30mm/s 30mm/s - -
Fan Speed 50% 40% - -
Retraction Distance 0.8mm 0.8mm - -
Retraction Speed 20mm/s 20mm/s - -
Retraction Extra Prime 0.35mm³ - -