3D Printing: Difference between revisions

Latest revision as of 16:30, 25 September 2022

Klipper with Fluidd

Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
Do updates later from Web GUI

Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh

Webinterface > Serial Connection > General > /tmp/printer
Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt

edit:
~/printer.cfg

Klipper on Kingroon KP3S

Kingroon KP3S

Slicer Settings

	PLA			PETG			ABS
	KP3S	Ender	CR10	KP3S	Ender	CR10	KP3S	Ender	CR10
Skin Overlap Percentage	5%			5%			15%	-	-
Infill Overlap Percentage	10%			10%			20%	-	-
Printing Temperature	215°C			240°C			245°C	-	-
Build Plate Temperature	60°C			70°C			100°C	-	-
Print Speed	100mm/s			100mm/s			100mm/s	-	-
Travel Speed	180mm/s			180mm/s			180mm/s	-	-
Initial Layer Speed	30mm/s			30mm/s			30mm/s	-	-
Retraction Distance	0.0			0.8mm			0.8mm	-	-
Retraction Speed	-			20mm/s			20mm/s	-	-
Retraction Extra Prime	-			0.35mm³			0.5mm³	-	-
Fan Speed	60%			40%			40%+	-	-

@@ Line 26: / Line 26: @@
 !                !! colspan="3" | PLA !! colspan="3" | PETG !! colspan="3" | ABS
 |-
-|
+!
-|KP3S
+!KP3S
-|Ender
+!Ender
-|CR10
+!CR10
-|KP3S
+!KP3S
-|Ender
+!Ender
-|CR10
+!CR10
-|KP3S
+!KP3S
-|Ender
+!Ender
-|CR10
+!CR10
 |-
 | Skin Overlap Percentage
 | colspan="3" style="text-align: center;" | 5%
-| colspan="3" |15%
+| colspan="3" style="text-align: center;" |5%
-|
+|15%
-|
+|<nowiki>-</nowiki>
-|
+|<nowiki>-</nowiki>
 |-
 | Infill Overlap Percentage
 | colspan="3" style="text-align: center;" | 10%
-| colspan="3" |20%
+| colspan="3" style="text-align: center;" | 10%
+|20%
+| -
+|<nowiki>-</nowiki>
+|-
+| Printing Temperature
+| colspan="3" style="text-align: center;" | 215°C
+| colspan="3" style="text-align: center;" | 240°C
+|245°C
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Build Plate Temperature
+| colspan="3" style="text-align: center;" | 60°C
+| colspan="3" style="text-align: center;" | 70°C
+|100°C
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+|Print Speed
+|100mm/s
 |
 |
+|100mm/s
 |
+|
+|100mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |-
-| Printing Temperature
+|Travel Speed
-| colspan="3" style="text-align: center;" | 215
+|180mm/s
-| colspan="3" |230
+|
 |
+|180mm/s
 |
 |
+|180mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |-
-| Build Plate Temperature
+|Initial Layer Speed
-| colspan="3" style="text-align: center;" | 60
+|30mm/s
-| colspan="3" |70
+|
 |
+|30mm/s
 |
 |
+|30mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |-
 | Retraction Distance
-| 5,5
+| 0.0
-|
-| || 2
-|
-| ||
 |
+|  || 0.8mm
 |
+|  || 0.8mm
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |-
 | Retraction Speed
-| 25
+| -
 |
-| || 25
+|  || 20mm/s
 |
-| ||
+|  || 20mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Retraction Extra Prime
+| -
 |
+|  || 0.35mm³
 |
+|  || 0.5mm³
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |-
-| Retraction Minimum Travel
+|Fan Speed
-| 1,5
+|60%
 |
-| || 1,0
 |
-| ||
+|40%
 |
 |
+|40%+
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
 |}
 [[Category:Hardware]]