3D Printing
Klipper with Fluidd
- Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
- Do updates later from Web GUI
Klipper with OctoPrint
git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh
- Webinterface > Serial Connection > General > /tmp/printer
- Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
- Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit: ~/printer.cfg
Klipper on Kingroon KP3S
Slicer Settings
| PLA | PETG | ABS | |||||||
|---|---|---|---|---|---|---|---|---|---|
| KP3S | Ender | CR10 | KP3S | Ender | CR10 | KP3S | Ender | CR10 | |
| Skin Overlap Percentage | 5% | 15% | |||||||
| Infill Overlap Percentage | 10% | 20% | |||||||
| Printing Temperature | 215°C | 230°C | |||||||
| Build Plate Temperature | 60°C | 70°C | |||||||
| Retraction Distance | 5,5 | 2 | |||||||
| Retraction Speed | 25 | 25 | |||||||
| Retraction Minimum Travel | 1,5 | 1,0 | |||||||