Kingroon KP3S

Hardware Mods

Change TMC drivers to UART Mode

• https://www.3d-druck-community.de/showthread.php?tid=28594

Software Mods

Installing Klipper

• ~ git clone https://github.com/th33xitus/kiauh.git
• cd kiauh
• ./kiauh.sh

Enable extra low-level
STMicroelectronics STM32
STM32F103
28KiB bootloader
8 MHZ crystal
USART PB11/PB10
250000 Baud
!PC6,!PD13 GPIO pins at startup

• cd ~/klipper/
• ./scripts/update_mks_robin.py ./out/klipper.bin ./out/Robin_nano.bin

Klipper printer.cfg

• https://3dprintbeginner.com/how-to-install-klipper-on-kingroon-kp3s/
• https://gist.github.com/nezuppo/0d06444bbf61e6d6a8953caf31e5f25d
• Extruder=7.41