3D Printing: Difference between revisions
mNo edit summary |
|||
| Line 38: | Line 38: | ||
|- | |- | ||
| Skin Overlap Percentage | | Skin Overlap Percentage | ||
| colspan="3" | 5% | | colspan="3" style="text-align: center;" | 5% | ||
| colspan="3" |15% | | colspan="3" |15% | ||
| | | | ||
| Line 45: | Line 45: | ||
|- | |- | ||
| Infill Overlap Percentage | | Infill Overlap Percentage | ||
| colspan="3" | 10% | | colspan="3" style="text-align: center;" | 10% | ||
| colspan="3" | 20% | | colspan="3" |20% | ||
| | | | ||
| | | | ||
| Line 52: | Line 52: | ||
|- | |- | ||
| Printing Temperature | | Printing Temperature | ||
| colspan="3" | | | colspan="3" style="text-align: center;" | 215 | ||
| colspan="3" | | | colspan="3" |230 | ||
| | | | ||
| | | | ||
| Line 59: | Line 59: | ||
|- | |- | ||
| Build Plate Temperature | | Build Plate Temperature | ||
| colspan="3" | | | colspan="3" style="text-align: center;" | 60 | ||
| colspan="3" | | | colspan="3" |70 | ||
| | | | ||
| | | | ||
Revision as of 12:27, 24 September 2022
Klipper with Fluidd
- Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
- Do updates later from Web GUI
Klipper with OctoPrint
git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh
- Webinterface > Serial Connection > General > /tmp/printer
- Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
- Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit: ~/printer.cfg
Klipper on Kingroon KP3S
Slicer Settings
| PLA | PETG | ABS | |||||||
|---|---|---|---|---|---|---|---|---|---|
| KP3S | Ender | CR10 | KP3S | Ender | CR10 | KP3S | Ender | CR10 | |
| Skin Overlap Percentage | 5% | 15% | |||||||
| Infill Overlap Percentage | 10% | 20% | |||||||
| Printing Temperature | 215 | 230 | |||||||
| Build Plate Temperature | 60 | 70 | |||||||
| Retraction Distance | 5,5 | 2 | |||||||
| Retraction Speed | 25 | 25 | |||||||
| Retraction Minimum Travel | 1,5 | 1,0 | |||||||