3D Printing: Difference between revisions
| Line 53: | Line 53: | ||
| Printing Temperature | | Printing Temperature | ||
| colspan="3" style="text-align: center;" | 215°C | | colspan="3" style="text-align: center;" | 215°C | ||
| colspan="3" style="text-align: center;" | | | colspan="3" style="text-align: center;" | 240°C | ||
|255°C | |255°C | ||
|<nowiki>-</nowiki> | |<nowiki>-</nowiki> | ||
Revision as of 18:06, 24 September 2022
Klipper with Fluidd
- Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
- Do updates later from Web GUI
Klipper with OctoPrint
git clone https://github.com/Klipper3d/klipper ./klipper/scripts/install-octopi.sh
- Webinterface > Serial Connection > General > /tmp/printer
- Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
- Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
edit: ~/printer.cfg
Klipper on Kingroon KP3S
Slicer Settings
| PLA | PETG | ABS | |||||||
|---|---|---|---|---|---|---|---|---|---|
| KP3S | Ender | CR10 | KP3S | Ender | CR10 | KP3S | Ender | CR10 | |
| Skin Overlap Percentage | 5% | 15% | 5% | - | - | ||||
| Infill Overlap Percentage | 10% | 20% | 10% | - | - | ||||
| Printing Temperature | 215°C | 240°C | 255°C | - | - | ||||
| Build Plate Temperature | 60°C | 70°C | 100°C | - | - | ||||
| Print Speed | 100mm/s | 100mm/s | - | - | |||||
| Travel Speed | 180mm/s | 180mm/s | - | - | |||||
| Initial Layer Speed | 30mm/s | 30mm/s | - | - | |||||
| Fan Speed | 60% | 40% | - | - | |||||
| Retraction Distance | 0.0 | 0.8mm | - | - | |||||
| Retraction Speed | - | 20mm/s | - | - | |||||
| Retraction Extra Prime | - | 0.35mm³ | - | - | |||||