ESP types: Difference between revisions
mNo edit summary |
m →ESP8266 |
||
| Line 90: | Line 90: | ||
|Boot failure if low | |Boot failure if low | ||
|- | |- | ||
| colspan="6" |Inputs | | colspan="6" |'''Inputs''' | ||
| | | | ||
|- | |- | ||
| Line 101: | Line 101: | ||
| | | | ||
|- | |- | ||
| colspan="6" |Serial | | colspan="6" |'''Serial''' | ||
| | | | ||
|- | |- | ||
| Line 110: | Line 110: | ||
|x | |x | ||
|TX | |TX | ||
| | |high on boot, failure if low | ||
|- | |- | ||
|GPIO3 | |GPIO3 | ||
| Line 118: | Line 118: | ||
|x | |x | ||
|RX | |RX | ||
| | |high on boot | ||
|- | |- | ||
| colspan="6" |Strapping Pins (Boot) | | colspan="6" |'''Strapping Pins (Boot)''' | ||
| | | | ||
|- | |- | ||
| Line 137: | Line 137: | ||
|x (LED) | |x (LED) | ||
| | | | ||
| | |high on boot, boot failure if low | ||
|} | |} | ||
| Line 302: | Line 302: | ||
|(Platform IO JTAG) | |(Platform IO JTAG) | ||
|- | |- | ||
| colspan="8" |Input only | | colspan="8" |'''Input only''' | ||
|- | |- | ||
|IO34 | |IO34 | ||
| Line 340: | Line 340: | ||
|Input only, Hall | |Input only, Hall | ||
|- | |- | ||
| colspan="8" |Serial, I2C, SPI | | colspan="8" |'''Serial, I2C, SPI''' | ||
|- | |- | ||
|IO1 | |IO1 | ||
| Line 378: | Line 378: | ||
|I2C SCL | |I2C SCL | ||
|- | |- | ||
| colspan="8" |Strapping Pins (Boot) | | colspan="8" |'''Strapping Pins (Boot)''' | ||
|- | |- | ||
|IO0 | |IO0 | ||
| Line 416: | Line 416: | ||
|Low = no boot log | |Low = no boot log | ||
|- | |- | ||
| colspan="8" |Flash Chip | | colspan="8" |'''Flash Chip''' | ||
|- | |- | ||
|IO06 | |IO06 | ||
Revision as of 20:13, 29 November 2020
| Board PinOuts |
ESP8266
![[1]](https://esp8266-server.de/dateien/wemos/D1-mini-pinoutKl.png){kind=link}
![[2]](https://homecircuits.eu/blog/wp-content/uploads/2016/01/esp-01-pins.jpg){kind=link}
| Pin | I2C | SPI | ESP-01 | Comment | Boot behaviour | |
|---|---|---|---|---|---|---|
| GPIO5 | D1 | |||||
| GPIO4 | D2 | |||||
| GPIO14 | D5 | SCK | ||||
| GPIO12 | D6 | MISO | ||||
| GPIO13 | D7 | MOSI | ||||
| GPIO16 | D0 | high on boot | ||||
| GPIO15 | D8 | CS | Boot failure if high | |||
| GPIO0 | D3 | x | Boot failure if low | |||
| Inputs | ||||||
| ADC | A0 | Analog input | ||||
| Serial | ||||||
| GPIO1 | TX | x | TX | high on boot, failure if low | ||
| GPIO3 | RX | x | RX | high on boot | ||
| Strapping Pins (Boot) | ||||||
| GPIO16 | ||||||
| GPIO2 | D4 | x (LED) | high on boot, boot failure if low | |||
ESP32
![[3]](https://www.bastelgarage.ch/image/catalog/Artikel/420571-420580/420571-Pinout.jpg){kind=link}
![[4]](http://1.bp.blogspot.com/-mG0x8f0BKTA/WmiYamp9XdI/AAAAAAAAg5Y/N_P7plcbtmU-15JKqURYqE_yjt98AUdxwCLcBGAs/s1600/Lolin32_pinout03.png){kind=link}
![[5]](https://raw.githubusercontent.com/AchimPieters/esp32-homekit-camera/master/Images/ESP32-30PIN-DEVBOARD.png){kind=link}
![[6]](https://raw.githubusercontent.com/AchimPieters/esp32-homekit-camera/master/Images/ESP32-38PIN-DEVBOARD.png){kind=link}
| Pin | ADC1 | DAC | RTC(WakeUp) | Touch | SPI | Comment | |
|---|---|---|---|---|---|---|---|
| IO04 | x | x | |||||
| IO05 | CS | ||||||
| IO16 | |||||||
| IO17 | |||||||
| IO18 | CLK | ||||||
| IO19 | MISO | ||||||
| IO23 | MOSI | ||||||
| IO25 | x | x | |||||
| IO26 | x | x | |||||
| IO27 | x | x | |||||
| IO32 | x | x | x | ||||
| IO33 | x | x | x | ||||
| IO12 | x | x | HSPI | (Platform IO JTAG) | |||
| IO13 | x | x | HSPI | (Platform IO JTAG) | |||
| IO14 | x | x | HSPI | (Platform IO JTAG) | |||
| IO15 | x | x | HSPI | (Platform IO JTAG) | |||
| Input only | |||||||
| IO34 | x | x | Input only | ||||
| IO35 | x | x | Input only | ||||
| IO36 | x | x | Input only, Hall | ||||
| IO39 | x | x | Input only, Hall | ||||
| Serial, I2C, SPI | |||||||
| IO1 | TX | ||||||
| IO3 | RX | ||||||
| IO21 | I2C SDA | ||||||
| IO22 | I2C SCL | ||||||
| Strapping Pins (Boot) | |||||||
| IO0 | x | Boot button | |||||
| IO2 | x | Block flash | |||||
| IO5 | ? | ||||||
| IO15 | Low = no boot log | ||||||
| Flash Chip | |||||||
| IO06 | |||||||
| IO07 | |||||||
| IO08 | |||||||
| IO09 | |||||||
| IO10 | |||||||
| IO11 | |||||||