Revision as of 14:41, 22 November 2018

OpenVPN - Routing Howto

OpenVPN Internet Server

easy-rsa
/etc/openvpn/server.conf

port 1194
proto udp
dev tun
ca    /etc/openvpn/easy-rsa/keys/ca.crt
cert  /etc/openvpn/easy-rsa/keys/server.crt
key   /etc/openvpn/easy-rsa/keys/server.key
dh    /etc/openvpn/easy-rsa/keys/dh2048.pem
tls-auth /etc/openvpn/easy-rsa/keys/ta.key 0
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
client-config-dir /etc/openvpn/clients
route 192.168.111.0 255.255.255.0
push "dhcp-option DNS 10.8.0.1"
client-to-client
keepalive 10 120
comp-lzo
max-clients 20
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3

;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

;route 192.168.40.128 255.255.255.248
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
;learn-address ./script
;push "redirect-gateway def1 bypass-dhcp"
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"
;duplicate-cn
;cipher BF-CBC        # Blowfish (default)
;cipher AES-128-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES
;log         openvpn.log
;log-append  openvpn.log
;mute 20

/etc/openvpn/clients/router.local

iroute 192.168.111.0 255.255.255.0

/etc/sysctl.conf

net.ipv4.ip_forward=1

rc.local

iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
/etc/init.d/dnsmasq start

apt-get install dnsmasq
/etc/dnsmasq.conf

interfaces=tun0
bind-interfaces
no-hosts
address=/server.domain.de/10.8.0.1

OpenVPN Home Router Client (OpenWrt)

/etc/config/dhcp

 option rebind_protection '0'

/etc/openvpn/client.ovpn

client
dev tun
proto udp
remote server.domain.de 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/router.local.crt
key /etc/openvpn/router.localt.key
ns-cert-type server
tls-auth /etc/openvpn/ta.key 1
comp-lzo
verb 3
log /tmp/log/openvpn.log
script-security 3 system
up /etc/openvpn/tun-up.sh
down /etc/openvpn/tun-down.sh

/etc/openvpn/tun-up.sh

#!/bin/sh
mv /tmp/resolv.conf.auto /tmp/resolv.conf.auto.hold
#echo search mlnet > /tmp/resolv.conf.auto
echo $foreign_option_1 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' > /tmp/resolv.conf.auto
#echo $foreign_option_2 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' >> /tmp/resolv.conf.auto
#echo $foreign_option_3 | sed -e 's/dhcp-option DOMAIN/domain/g' -e 's/dhcp-option DNS/nameserver/g' >> /tmp/resolv.conf.auto

/etc/openvpn/tun-down.sh

#!/bin/sh
mv /tmp/resolv.conf.auto.hold /tmp/resolv.conf.auto

OpenWrt / Network / Interfaces

Add interface
Name: vpn
protocol: unmanaged
interface: tun0

OpenWrt / Network / Firewall

Add zone
Input: accept
Output: accept
Forward: accept
Masquerading: check
covered networks: vpn = check
Interzone forwarding: allow to = check
allow from = check

OpenVPN Mobile Client

Internal traffic through VPN / Internet traffic through ISP

client
dev tun
proto udp
remote server.domain.de 1194 
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert device1.crt
key device1.key
ns-cert-type server
tls-auth ta.key 1
comp-lzo
verb 3

Internal traffic through VPN + Internet traffic through VPN

client
dev tun
proto udp
remote server.domain.de 1194
resolv-retry infinite
nobind 
persist-key
persist-tun
ca ca.crt
cert device1.crt
key device1.key
ns-cert-type server
tls-auth ta.key 1
comp-lzo
verb 3
redirect-gateway def1 bypass-dhcp

EasyRSA 2.x

Initial setup

make-cadir certificates && cd certificates

edit "vars":

export KEY_COUNTRY="US"
export KEY_PROVINCE="CA"
export KEY_CITY="SanFrancisco"
export KEY_ORG="Fort-Funston"
export KEY_EMAIL="me@myhost.mydomain"
export KEY_OU="MyOrganizationalUnit"

source vars

./clean-all

./build-ca

./build-key-server server

./build-dh

openvpn --genkey --secret keys/ta.key

Create client keys

source vars

./build-key client1

./build-key --batch client1

Links

Web frontends:
- https://github.com/Chocobozzz/OpenVPN-Admin
- https://github.com/furlongm/openvpn-monitor/

@@ Line 172: / Line 172: @@
 <pre>source vars</pre>
 <pre>./build-key client1</pre>
+<pre>./build-key --batch client1</pre>
 = Links =