3D Printing: Difference between revisions

Latest revision as of 16:30, 25 September 2022

Klipper with Fluidd

Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
Do updates later from Web GUI

Klipper with OctoPrint

git clone https://github.com/Klipper3d/klipper
./klipper/scripts/install-octopi.sh

Webinterface > Serial Connection > General > /tmp/printer
Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt

edit:
~/printer.cfg

Klipper on Kingroon KP3S

Kingroon KP3S

Slicer Settings

	PLA			PETG			ABS
	KP3S	Ender	CR10	KP3S	Ender	CR10	KP3S	Ender	CR10
Skin Overlap Percentage	5%			5%			15%	-	-
Infill Overlap Percentage	10%			10%			20%	-	-
Printing Temperature	215°C			240°C			245°C	-	-
Build Plate Temperature	60°C			70°C			100°C	-	-
Print Speed	100mm/s			100mm/s			100mm/s	-	-
Travel Speed	180mm/s			180mm/s			180mm/s	-	-
Initial Layer Speed	30mm/s			30mm/s			30mm/s	-	-
Retraction Distance	0.0			0.8mm			0.8mm	-	-
Retraction Speed	-			20mm/s			20mm/s	-	-
Retraction Extra Prime	-			0.35mm³			0.5mm³	-	-
Fan Speed	60%			40%			40%+	-	-

@@ Line 1: / Line 1: @@
-= Klipper =
+== Klipper with Fluidd ==
 * Download FluiddPi Image: https://github.com/fluidd-core/FluiddPI
 * Do updates later from Web GUI
-== Klipper on Kingroon KP3S ==
-* ~ git clone https://github.com/th33xitus/kiauh.git
-* cd kiauh
+== Klipper with OctoPrint ==
-* ./kiauh.sh
+<pre>
+git clone https://github.com/Klipper3d/klipper
+./klipper/scripts/install-octopi.sh
+</pre>
+* Webinterface > Serial Connection > General > /tmp/printer
+* Webinterface > Serial Connection > Behaviour > Error > Cancel (DO NOT DISCONNECT)
+* Webinterface > Serial Connection > Behaviour > Cancelling > Uncheck Attempt
 <pre>
-Enable extra low-level
+edit:
-STMicroelectronics STM32
+~/printer.cfg
-STM32F103
-KiB bootloader
-MHZ crystal
-USART PB11/PB10
-Baud
-!PC6,!PD13 GPIO pins at startup
 </pre>
-* cd ~/klipper/
-* ./scripts/update_mks_robin.py ./out/klipper.bin ./out/Robin_nano.bin
-* Printer.cfg
-** https://3dprintbeginner.com/how-to-install-klipper-on-kingroon-kp3s/
-** https://gist.github.com/nezuppo/0d06444bbf61e6d6a8953caf31e5f25d
-** Extruder 7.41
+== Klipper on Kingroon KP3S ==
+* [[Kingroon KP3S]]
+== Slicer Settings ==
+{| class="wikitable"
+|-
+!                !! colspan="3" | PLA !! colspan="3" | PETG !! colspan="3" | ABS
+|-
+!
+!KP3S
+!Ender
+!CR10
+!KP3S
+!Ender
+!CR10
+!KP3S
+!Ender
+!CR10
+|-
+| Skin Overlap Percentage
+| colspan="3" style="text-align: center;" | 5%
+| colspan="3" style="text-align: center;" |5%
+|15%
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Infill Overlap Percentage
+| colspan="3" style="text-align: center;" | 10%
+| colspan="3" style="text-align: center;" | 10%
+|20%
+| -
+|<nowiki>-</nowiki>
+|-
+| Printing Temperature
+| colspan="3" style="text-align: center;" | 215°C
+| colspan="3" style="text-align: center;" | 240°C
+|245°C
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Build Plate Temperature
+| colspan="3" style="text-align: center;" | 60°C
+| colspan="3" style="text-align: center;" | 70°C
+|100°C
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+|Print Speed
+|100mm/s
+|
+|
+|100mm/s
+|
+|
+|100mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+|Travel Speed
+|180mm/s
+|
+|
+|180mm/s
+|
+|
+|180mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+|Initial Layer Speed
+|30mm/s
+|
+|
+|30mm/s
+|
+|
+|30mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Retraction Distance
+| 0.0
+|
+|  || 0.8mm
+|
+|  || 0.8mm
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Retraction Speed
+| -
+|
+|  || 20mm/s
+|
+|  || 20mm/s
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+| Retraction Extra Prime
+| -
+|
+|  || 0.35mm³
+|
+|  || 0.5mm³
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|-
+|Fan Speed
+|60%
+|
+|
+|40%
+|
+|
+|40%+
+|<nowiki>-</nowiki>
+|<nowiki>-</nowiki>
+|}
 [[Category:Hardware]]