Revision as of 17:57, 30 October 2021

Klipper

[{Kingroon KP3S]]

@@ Line 4: / Line 4: @@
 == Klipper on Kingroon KP3S ==
-* ~ git clone https://github.com/th33xitus/kiauh.git
+[{Kingroon KP3S]]
-* cd kiauh
-* ./kiauh.sh
-<pre>
-Enable extra low-level
-STMicroelectronics STM32
-STM32F103
-KiB bootloader
-MHZ crystal
-USART PB11/PB10
-Baud
-!PC6,!PD13 GPIO pins at startup
-</pre>
-* cd ~/klipper/
-* ./scripts/update_mks_robin.py ./out/klipper.bin ./out/Robin_nano.bin
-* Printer.cfg
-** https://3dprintbeginner.com/how-to-install-klipper-on-kingroon-kp3s/
-** https://gist.github.com/nezuppo/0d06444bbf61e6d6a8953caf31e5f25d
-** Extruder 7.41
 [[Category:Hardware]]