Linux/Scan Server: Difference between revisions

Latest revision as of 13:57, 1 April 2017

Fujitsu ScanSnap S1500 scan server with Raspberry Pi

general

apt-get install sane

scanbd (daemon for checking the scanner button)

apt-get install build-essential
apt-get install libconfuse-dev libusb-dev libudev-dev libdbus-1-dev dbus libsane-dev

wget scanbd...
...unpack...
./configure
make
make install

cp -R /etc/sane.d /usr/local/etc/scanbd
edit /usr/local/etc/scanbd/scanbd.conf
copy scanbd dbusfile
copy scanbd init file
update-rc.d scanbd disable

udev (actions when plugging/unplugging scanner)

/etc/udev/rules.d/scansnap.rules

ACTION==""

/srv/scanner/udev_connect.sh

sudo /etc/init.d/scanbd restart

/srv/scanner/udev_disconnect.sh

sudo /etc/init.d/scanbd stop

owncloud

old stuff

scanimage --resolution 300 --device-name $2 --mode Color --source "ADF Front" --page-width 210 --page-height 297 -x 210 -y 297 | 
pnmflip -r180 | 
pnmtops -width 8.263 -height 11.69 -imagewidth 8.263 -imageheight 11.69 > $TMPFILE_PS
ps2pdf $TMPFILE_PS $TMPFILE_PDF

@@ Line 1: / Line 1: @@
 == Fujitsu ScanSnap S1500 scan server with Raspberry Pi ==
+* general
+<blockquote>
+<pre>
+apt-get install sane
+</pre>
+</blockquote>
-* scanbd
+* scanbd (daemon for checking the scanner button)
 <blockquote>
 <pre>
-apt-get install sane
 apt-get install build-essential
 apt-get install libconfuse-dev libusb-dev libudev-dev libdbus-1-dev dbus libsane-dev
@@ Line 30: / Line 35: @@
 </blockquote>
-* /srv/scanner/udev_connect.sh
+* udev (actions when plugging/unplugging scanner)
+:* /etc/udev/rules.d/scansnap.rules
+<blockquote>
+<pre>
+ACTION==""
+</pre>
+</blockquote>
+:* /srv/scanner/udev_connect.sh
 <blockquote>
 <pre>
@@ Line 37: / Line 51: @@
 </blockquote>
-* /srv/scanner/udev_disconnect.sh
+:* /srv/scanner/udev_disconnect.sh
 <blockquote>
 <pre>
@@ Line 43: / Line 57: @@
 </pre>
 </blockquote>
+* owncloud
@@ Line 55: / Line 72: @@
 </pre>
 </blockquote>
+[[Category:Linux/Services]]
+[[Category:Linux]]